Unused since, it's recently arrived back with us, along with several other gauge 1 locomotives. Photographs opposite were taken in recent days, words below are from last time it was here.
A gauge 1 Aster GWR King, it recently arrived with us along with several other gauge 1 engines as the owner traded up (several) size(s) to 7 1/4 inch gauge.
The original pressure gauge developed a fault and has been replaced with a slightly larger gauge reading in psi rather than bar.
Complete with original manufacturer's documentation, some tools and a basic wooden carrying crate.
| gauge | Gauge 1 & smaller |
| length/inches | 26 |
| width/inches | 4 |
| height/inches | 5 |
| weight/kg | 9 |
| wheel material | cast iron |
| axlebox type | plain bearing |
| cylinder material | brass |
| valve type | slide |
| valve gear | Walschaerts |
| reverser type | screw |
| lubricator type | displacement |
| boiler number | 11083 |
| boiler maker | Aster Hobbies |
| CE mark | n/a - < 2 litre capacity |
| working pressure/psi | 60 |
| boiler type | locomotive |
| boiler material | copper |
| boiler construction | silver soldered |
| hydraulic test valid to | 30-Jan-2027 |
| safety valve(s) | 1 |
| safety valve type | spring |
| mechanical pump | 1 |
| hand pump | 1 |
| whistle | yes |