Sold September 2024 Back to Archive

7 1/4 inch gauge Romulus 0-4-0T - stock code 12083

A 7 1/4 inch gauge "Romulus" 0-4-0T, based on the popular Roger Marsh design with variations including side tanks replacing the well tank, Walschaerts valve gear rather than Hackworth, and a beautifully made brass dome.

The silver soldered copper boiler has had hydraulic and steam tests with new certification issued - the injectors pick up reliably, safety valves work nicely, needing no encouragement to shut once pressure has dropped.

On test the engine steamed freely and proved a delight to drive, running well in both directions. A variety of minor jobs were attended to at the pre-sale service, including adjustment of drain cock linkage and elimination of play in lubricator linkage, which caused occasional erratic feed.

Supplied with a set of firing irons and starter pack of coal and oil. If required we would be more than happy to include half a day's training at our works on the firing, driving and disposal of the engine for a new owner.


gauge 7 1/4 inch
length/inches 50
width/inches 20
height/inches 33
weight/kg 207
wheel material cast iron
axlebox type plain bearing
cylinder material cast iron
valve type slide
valve gear Walschaerts
reverser type pole
lubricator type mechanical
injector(s) 2
boiler number 52495
year built 1995
CE mark n/a - non-commercial
working pressure/psi 80
boiler type locomotive
boiler material copper
boiler construction silver soldered
hydraulic test valid to 23-Jun-28
steam test valid to 23-Sep-2025
safety valve(s) 2
safety valve type pop
whistle yes