The builder was obviously something of a polishing fanatic, with bulled-up brass everywhere including the unpainted saddle tank.
Largely complete, it runs after a fashion on air, however needs some attention to valve setting and timing.
Boiler has had a twice working pressure hydraulic test with certificate issued for same, warrantied good. The saddle tank needs soldering up on the front seams.
| gauge | 5 inch |
| length/inches | 32 |
| width/inches | 13 |
| height/inches | 22 |
| wheel material | cast iron |
| axlebox type | plain |
| cylinder material | cast iron |
| valve type | slide |
| valve gear | Hackworth |
| reverser type | pole |
| boiler number | 91 111 32 |
| CE mark | n/a - non-commercial |
| working pressure/psi | 80 |
| boiler type | marine |
| boiler material | copper |
| boiler construction | silver soldered |
| hydraulic test valid to | 15-Jan-2023 |
| superheater(s) | 2 |
| superheater type | radiant |
| safety valve(s) | 2 |
| safety valve type | spring |
| mechanical pump | 1 |
| hand pump | 1 |
| whistle | yes |