Run until a couple of years ago when the lockdown put the kibosh on club running, it has been stored indoors since.
The boiler has had recent hydraulic test with new certification issued; the engine runs on air, although the crank axle requires attention to a loose mainshaft - not a particularly difficult job once the wheelset is out and on the bench.
Complete with firing irons and drawings.
| length/inches | 37 + 23.5 |
| width/inches | 9 1/2 |
| height/inches | 15 |
| wheel material | cast iron |
| axlebox type | plain bearing |
| cylinder material | gunmetal |
| valve type | slide |
| valve gear | Stephensons |
| reverser type | pole |
| lubricator type | mechanical |
| injector(s) | 1 |
| boiler number | 608.020708 |
| year built | 2008 |
| boiler maker | B.Collis |
| CE mark | n/a - non-commercial |
| working pressure/psi | 80 |
| boiler type | locomotive |
| boiler material | copper |
| boiler construction | silver soldered with nutted and calked firebox |
| hydraulic test valid to | 6-Apr-2026 |
| safety valve(s) | 2 |
| safety valve type | spring |
| mechanical pump | 1 |
| hand pump | 1 |
| whistle | yes |