An older engine, paintwork is "lived in" although the engine itself still steam freely and runs well - there's a clip of it running outside the workshop here., notching up fully in forwards and a useful couple of notches in reverse.
Safety valves open at 90psi and drop 10psi before closing cleanly with a "pop", water feeds all work well. The regulator leaks past slightly.
Complete with drawings and construction manual with LBSC's "words & music".
| gauge | 3 1/2 inch |
| length/inches | 27 + 17 |
| width/inches | 7 |
| height/inches | 13 |
| wheel material | cast iron |
| axlebox type | plain bearing |
| cylinder material | gunmetal |
| valve type | slide |
| valve gear | Stephensons |
| reverser type | pole |
| lubricator type | mechanical |
| boiler number | 192 |
| year built | 1981 |
| boiler maker | P Beeby |
| working pressure/psi | 90 |
| boiler type | locomotive |
| boiler material | copper |
| boiler construction | silver soldered |
| hydraulic test valid to | 27-Oct-2024 |
| steam test valid to | 1-Jan-2022 |
| superheater(s) | 2 |
| superheater type | flue tube |
| safety valve(s) | 1 |
| safety valve type | spring |
| mechanical pump | 1 |
| hand pump | 1 |
| whistle | yes |