Designation	Victoria
Bore	1  inch
Stroke	2 inch
Configuration	Horizontal single cylinder mill engine
Length	15 1/2 inches
Width	6 1/2 inches
Height	7 1/8 inches
Extra equipment	Drain cocks Displacement lubricator Governor
Taps required	2, 5, 6, 7 BA 5/32, 3/16 x 40 tpi 1/4 x 32 tpi
Notes	One of the "new" range of engines that came out in the late 1970s based around a common cylinder assembly, crank and flywheel shared with the existing beam engine. Together with the James Coombes and Real, these engines have very elegant proportions and are capable, if well made, of running at very low speeds.