Feed pump
Displacement lubricator
Reversing gear
1/4 x 32 tpi
1/4, 3/8, 1/2, 5/8 x 26 tpi
The example below is fitted with a mechanical cylinder lubricator.
| Designation | No.5a |
| Bore | 2 1/4 inch |
| Stroke | 2 inch |
| Configuration | Vertical single cylinder |
| Height | 15 inches |
| Extra equipment | Drain cocks Feed pump Displacement lubricator Reversing gear |
| Taps required | 2, 4 BA 1/4 x 32 tpi 1/4, 3/8, 1/2, 5/8 x 26 tpi |
| Notes | Large engine suitable for driving dynamos, pumps and often
seen in small full-size boats as part of a marine plant. Stuart claimed
5/8 bhp at 1000 rpm on 60 psi pressure. A special large-size displacement
lubricator was available for this engine.
The example below is fitted with a mechanical cylinder lubricator. |
|
|